Abocom 802.11b/g Portable Router WAP2102 Guía de usuario descargar pdf (Pagina 18)

information.

Delete Selected: To delete clients from access to this Router, you may

firstly check the Select checkbox next to the MAC address and Comments,

and press Delete Selected.

Delete All: To delete all the clients from access to this Router, just press

Delete All without selecting the checkbox.

Reset: If you have made any selection, press Reset will clear all the select

mark.

WAN Port

Click Setup to enter the WAN Port Configuration screen.

WAN Access Type: Select the WAN access type (Static IP, DHCP, PPPoE

and PPTP) from the pull-down menu.

Attain DNS Automatically: Select to attain DNS automatically.

Set DNS Manually: Select to set DNS manually.

DNS1~3: Enter the DNS server IP address (es) provided by your ISP, or you

can specify your own preferred DNS server IP address(es).

DNS 1 and DNS 2 servers are optional. You can enter another DNS server’s

IP address as a backup. DNS 1 and DNS 2 servers will be used when the

DNS 1 server fails.

Clone MAC Address: Enter the MAC address that you wish to clone.

Respond to WAN Ping: Click to allow pinging from WAN side.

Save: Click to save and apply the current settings.

Reset: Click to clear and reset the current settings.

Close: click to exit the current settings.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 40 41

Sin comentarios

Abocom 802.11b/g Portable Router WAP2102 Guía de usuario Pagina 18