Abocom RE450 Guía de instalación descargar pdf (Pagina 25)

Performing Basic Imaging Operations 461

Novell Confidential Manual (99a) 28 October 2003

43 Performing Basic Imaging Operations

The following sections provide instructions for these basic imaging operations:

 “Triggering an Unattended Imaging Operation” on page 461

 “Manually Taking an Image of a Workstation” on page 462

 “Manually Putting an Image on a Workstation” on page 463

These instructions assume that you have already prepared the imaging server (see Chapter 40,

“Preparing an Imaging Server,” on page 443), prepared workstations for imaging (see Chapter 41,

“Setting Up Workstations for Imaging,” on page 445), and set up imaging policies (Chapter 42,

“Setting Up Imaging Policies,” on page 457).

Triggering an Unattended Imaging Operation

The following procedure explains how to set a flag in the Workstation object that says to take or

put an image on the workstation the next time it is booted, and then verify that the imaging

operation occurs as expected.

1 If the imaging operation that you want to trigger is to put an image on the workstation, do the

following. Otherwise, skip this step.

1a If you haven’t already done so, create the image to be put on the workstation. Make sure

to store it on your imaging server. For more information, see “Manually Taking an Image

of a Workstation” on page 462.

1b In ConsoleOne

, create a Workstation Image object in your NDS

or Novell

eDirectory

tree. Configure the object to point to the image file that is to be put on the

workstation. For more information, see “Creating a Workstation Image Object” on

page 471. For details on pointing to the image file, click Help in the Image File Location

dialog box.

2 In ConsoleOne, right-click the Workstation object > click Properties.

3 On the ZENworks Imaging Configuration page, do either of the following:

 To take an image of the workstation the next time it boots, check the first check box >

click the browse button next to the available field > select your imaging server and the

path and filename under which to store the new image > check the Use Compression

check box and select a compression option if you want to use compression (click Help

for details) > click OK.

 To put an image on the workstation the next time it boots, check the Put an Image on This

Workstation on Next Boot check box > check the box that says to use an image other than

the effective policy image or multicast session > click the browse button next to the

available field > select the Workstation Image object you created in Step 1b > click OK.

IMPORTANT: Be sure that the imaging server storing the image or the workstation receiving the image

has enough disk space for the image. Otherwise, you will receive a "Failed to write to proxy" error.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 77 78

Sin comentarios

Abocom RE450 Guía de instalación Pagina 25