Abocom RE450 Guía de instalación descargar pdf (Pagina 42)

478 ZENworks for Desktops 4.0.1 Administration Guide

Novell Confidential Manual (99a) 28 October 2003

Start the multicast session from the master computer or from the imaging server. If you start

the session from the master computer, the session master must be a workstation. If you start

the session from the imaging server, the session master must be a previously saved image file.

To start the multicast session from the master computer, at the master computer, type m > press

Enter. At the master computer, after all the other computers have registered as participants,

type g > press Enter.

The imaging engine begins creating the image of the master computer and the image is sent

to and put down on each participating computer. Any problems are reported back and

displayed on the master computer.

To start the multicast session from the imaging server, load the imaging server (imgserv.nlm

or .dll or .dlm) > select Manually Start Multicast > specify the full path to the image file you

want to multicast > specify session parameters > select Yes to start the multicast session.

The image is sent to and put down on each participating computer.

At the imaging server, select Multicast Sessions to see how many clients have registered and

how many the session is still waiting for. For example, 3/2 means 3 clients have registered and

2 more need to register before the session can begin. You can delete any session listed, even

if it is in progress, by selecting the session name > pressing Delete.

7 At each participating computer, when the imaging is done, do the following to boot the

computer with the new operating system:

7a At the Linux prompt, type lilo.s > press Enter.

7b Press Ctrl+Alt+Delete.

If the computer doesn’t boot to the new operating system (that is, if the Linux prompt

reappears), enter the lilo.s command again and reboot the computer a second time.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 77 78

Sin comentarios

Abocom RE450 Guía de instalación Pagina 42